backgroundRemoval.integration.test.ts exported seedSubmission for no reason — nothing imports it, since draftingBackgroundRemoval.integration.test.ts and adminItemDrafts.integration.test.ts each wrote their own seeding helpers. Dropped the export, kept the function for local use.
All three of these suites create a temporary uploads directory with mkdtemp and point UPLOADS_DIR at it, but none of them removed the directory afterward or restored the previous UPLOADS_DIR value — checked and the leak existed in all three, not just the one the review flagged. Each afterEach now removes its temp directory with fs.rm and restores (or deletes) UPLOADS_DIR to what it held before the test touched it, so this suite no longer leaves rubbish in the OS temp directory or a stale environment variable for whatever runs after it in the same process.
This is test scaffolding cleanup, not a feature change — no runtime path in the application deletes anything.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ANTHROPIC_API_KEY's explanatory paragraph already had a dangling continuation trailing after later entries. When REMBG_URL was added, its entry was inserted ahead of that continuation, so the file read as though "put a spend limit on the key in the Anthropic console" belonged to the background-removal sidecar rather than to Anthropic. This file is read during the cutover runbook, so a misattributed sentence there is not just cosmetic.
Reordered the comment lines so ANTHROPIC_API_KEY's full paragraph is contiguous and REMBG_URL's own two-line entry stands on its own at the end. No environment: line was touched — only the comment block above the services: section.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The module comment on backgroundRemoval.ts said "The original file stays on disk and so does every cut-out ever made." The original half is true and load-bearing; the cut-out half is not. cutoutPathFor is deterministic, so a photo that is restored and then cut out again overwrites the previous cut-out at the same path. Harmless — no original is ever touched — but the comment overstated what the module guarantees. Corrected it to say what is actually true.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The remove-background route's catch block turned every throw from removeImageBackground into a 502 "the background-removal service did not answer". But removeImageBackground also throws for an unrecognised file extension (a legacy .jpeg), for a file missing from the uploads volume, and when REMBG_URL is not set at all — none of which involve contacting the sidecar. The admin was told to retry a service that was never reached, while the real reason existed only in the server log.
Added SidecarRequestError in rembgClient.ts, following the NoOriginalToRestoreError pattern already in backgroundRemoval.ts. It is thrown only for failures that happen after actually attempting to reach the sidecar: the fetch call itself throwing (now wrapped in a try/catch, covering unreachable and timed-out), a non-2xx response, or a response that is not a PNG. It is deliberately not thrown for "REMBG_URL is not set", since that path never attempts contact at all.
The remove-background handler now checks err instanceof SidecarRequestError before answering 502; everything else answers 500 with a message that says what actually went wrong.
Added a unit test pairing (rembgClient.test.ts) asserting the sidecar-contacted failures are SidecarRequestError and the unconfigured case is not, and an integration test (adminItemDrafts.integration.test.ts) proving a missing upload file answers something other than 502 with a message that does not claim the service did not answer.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
item_drafts.remove_background is written once at intake and never updated afterward. Restoring a photo clears original_image_path, which is exactly what makes the row look "never cut out" to removeImageBackground — so a submitter's ticked checkbox, followed by the worker cutting the photo out, followed by an admin restoring a poor result, followed by a click on Regenerate, would silently re-cut the same photo the admin had just put back. Nothing was lost, but the control the design calls "what makes a poor result survivable" was quietly defeated by the button sitting next to it.
restoreImageOriginal now swaps the image's paths back and clears item_drafts.remove_background for that item in one transaction, so a restore that succeeds while the flag update fails cannot reintroduce the bug. An admin restoring any photo on an item is treated as overriding the submitter's original request for the whole item — the flag is per-item while the swap is per-photo, so there is no narrower place to record the decision, and turning off the whole item's auto-removal is the conservative direction: the alternative is re-cutting something a person deliberately undid.
Added an integration test in draftingBackgroundRemoval.integration.test.ts that drafts a submission with the intent set, cuts it out, restores it, mirrors what the admin's Regenerate button does (state back to queued, attempts cleared), runs the worker again, and asserts the photo is still not cut out.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The DraftQueue background-removal control gated both "Remove background" and "Restore original" on the same `backgroundRemoval` flag, which only reflects whether a sidecar is currently configured. Restoring is a pure database swap and never calls the sidecar, so once photos had already been cut out and REMBG_URL was later removed from the stack, the admin was left looking at a cut-out photo with no control at all and no way back to the original short of a hand-written SQL UPDATE — directly breaking the "the original is always restorable" invariant the feature is built on.
DraftCard now computes `enabled` per photo as `backgroundRemoval || image.original_image_path !== null`, so Restore original stays available whenever a photo has an original regardless of whether the sidecar is configured, while Remove background still requires a configured sidecar. Also corrected the docstring on `DraftQueueResponse.backgroundRemoval` in draftsApi.ts, which claimed the flag hides "the control" generically — it only ever governed the remove-background control.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds the per-photo control that closes out the background-removal feature: each photo in the review queue now gets a "Remove background" or "Restore original" button, whichever matches its current state, and the button only appears when the server reports a sidecar is configured. The label is read from original_image_path alone rather than a second flag, so there is nothing that could disagree with what the button actually does.
draftsApi.ts's fetchDrafts now returns { drafts, backgroundRemoval } instead of a bare Draft[], matching the breaking change Task 6 made to GET /api/admin/item-drafts. DraftImage gains original_image_path, and a new setImageBackground(itemId, imageId, action) posts to the remove-background/restore-original endpoints, preferring the server's error message the same way publishDraft does.
Also updates docs/ops/image-background-removal-stack.md: the status line no longer says "evaluated, not adopted", since the feature is adopted here, and the closing "If this is adopted" section is replaced with "How the application uses it", describing the two real entry points (the drafting worker's default-on checkbox, and this per-photo control) and confirming that nothing in the feature deletes a file or a row.
Adds an e2e case asserting the button's label appears on a freshly submitted item's card, scoped to that card by the sender's note per #241. It is unrun in this environment — the local stack was not started, per standing instruction not to run start-local.ps1 or Playwright without the user's supervision.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds a checkbox to the public submission page that lets a sender opt out of background removal, ticked by default because most items look better cut out and the reverse default would mean almost nobody got it. It only renders when the server reports the sidecar is configured, matching the intake link's new backgroundRemoval flag from Task 5 — an unconfigured environment gets no checkbox rather than one that would do nothing.
submitItem now takes removeBackground as a required fourth parameter, sent as the multipart string 'true' or 'false' to match the backend's exact-string opt-out contract. Making the parameter required rather than optional was deliberate, so the compiler would catch any call site left unupdated; the frontend build (which also type-checks tests/ via tsconfig.test.json) confirmed the only call site, in Submit.tsx, was updated.
scripts/start-local.ps1 now sets REMBG_URL for the local backend so the checkbox is visible during local and e2e runs; the value need not resolve, since no e2e submission reaches the sidecar without a configured drafting step.
Adds two e2e cases to intake-submit.spec.ts: the checkbox appears ticked by default, and a sender can uncheck it and still submit successfully. Both are written per the task-7 brief but not run in this session, since running Playwright requires the full local stack (database, backend, frontend dev server) which was not started.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Round 1 caught every throw from restoreImageOriginal() and reported it as a 404, on the theory that losing the concurrent-restore race is the only way that call fails. But the throw carried nothing to distinguish that race from a genuinely different failure during the same UPDATE — a dropped database connection, a transient outage — so a real failure was now silently reinterpreted as "someone already restored this" instead of surfacing as the loud 500 it was before.
backend/src/intake/backgroundRemoval.ts now exports NoOriginalToRestoreError, a named subclass of Error thrown in place of the bare Error restoreImageOriginal previously threw. The message text is unchanged, so backgroundRemoval.integration.test.ts's rejects.toThrow(/no original/) assertion keeps passing without modification.
backend/src/routes/adminItemDrafts.ts catches that class specifically in the restore-original handler and rethrows anything else, so a real failure still reaches the app-level error handler and comes back as a 500 instead of being mislabeled as "already done".
backend/tests/integration/adminItemDrafts.integration.test.ts adds a test that spies on restoreImageOriginal via jest.spyOn on the module namespace (the project compiles to CommonJS, so the route's call site reads the export off that object at call time, which makes the spy effective without jest.mock) to reject once with a plain Error, and asserts the response is 500 rather than 404 — proving the narrowing changes real behavior, not just internal structure. The spy is restored in a finally block.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
restore-original's precheck (existing.original_image_path === null) and restoreImageOriginal's own guard (WHERE ... AND original_image_path IS NOT NULL) could disagree under a race: two concurrent restores, or a rapid double-click, could both pass the precheck before either commits, and the loser's UPDATE would then match zero rows and throw. The handler had no try/catch around that call, so the throw propagated through asyncRoute to the app-level error handler and the caller got a bare 500, breaking the route's documented 200 | 404 contract even though the row itself was left correct.
Wraps the restoreImageOriginal call in a try/catch, matching the shape remove-background already uses in this file, but answering 404 rather than 502: losing this race means another admin already finished the restore, not that a downstream service failed. Adds a comment on the catch explaining why it exists, and a test that fires two restores concurrently and asserts neither comes back 500.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds two admin-gated endpoints on the review queue router: POST /:itemId/images/:imageId/remove-background and POST /:itemId/images/:imageId/restore-original. Both run synchronously and reuse the same backgroundRemoval module the drafting worker uses, so a cut-out obtained either way is identical and either can be undone by Restore.
Ownership is scoped by item as well as by image (imageOfItem selects on id AND item_id), because the image id is a serial and guessing one is easy — a photo belonging to a different submission must not be reachable through another item's URL. A sidecar failure returns 502, not 500, and leaves the row untouched, since removeImageBackground only writes the row after the cut-out file already exists on disk.
GET /api/admin/item-drafts now returns { drafts, backgroundRemoval } instead of { drafts }, and each image in the payload gains original_image_path, which is what the review queue UI will use to decide between "Remove background" and "Restore original". DRAFT_SELECT's images aggregate is extended accordingly, keeping the deliberate column spelling that guards against the upload_links token digest leaking into the response.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The public intake POST now reads a `removeBackground` multipart field and stores it on the new `item_drafts.remove_background` column. The checkbox on the submission page is ticked by default, so a client that sends nothing gets `true` — only the exact string `'false'` opts out, so a stray or unexpected value is treated as consent rather than a silent refusal.
The GET now also reports `backgroundRemoval: isRembgConfigured()` alongside the label, so the submission page knows up front whether the feature exists in this environment at all. Neither handler calls the sidecar or the AI — this task only records intent for the drafting worker to act on later, and the existing ordering of `requireUsableLink` and `requireCapacity` ahead of `uploadImages` is unchanged.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Wires removeBackgroundsForItem into draftQueued, gated on the submitter's remove_background intent recorded on item_drafts. The step runs after the draft is committed and catches for itself, so an unreachable or erroring sidecar never turns a draft that was written correctly into a failed one — the photo simply keeps its original, and the admin's per-photo control in the review queue is still there to do it by hand. It is awaited, unlike the notification below it, so a sweep that has returned has finished its work; nothing on the request path waits on it.
Adds backend/tests/integration/draftingBackgroundRemoval.integration.test.ts as a new file rather than extending drafting.integration.test.ts, because that suite has never produced a successful draft and therefore has no draftListing mock — adding one there would be file-wide and would change what its existing tests exercise.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds backend/src/intake/backgroundRemoval.ts, the shared module the drafting worker and the admin endpoints both call so a cut-out obtained either way is undoable the same way.
cutoutPathFor is pure and writes a new file beside the original rather than overwriting it, which is what keeps the original restorable and makes the JPEG-to-PNG change free. removeImageBackground only points the row at the new file after it is already on disk, and is idempotent via the original_image_path IS NOT NULL check — load-bearing twice, since it also stops a second pass from recording the cut-out as the original and losing the real one for good. restoreImageOriginal swaps the paths back and deliberately leaves the cut-out file on disk.
Extends the Task 1 integration test file with a stub sidecar bound to an ephemeral port and covers the no-op-on-repeat case plus three failure modes (500, non-image body, unreachable), asserting the row is left untouched in every failure case.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds the client that will let the intake path remove backgrounds from submitted photos via the rembg sidecar over HTTP. isRembgConfigured() reports whether REMBG_URL is set (unconfigured is a normal, working state, not a failure), and removeBackground() posts a file to /api/remove and resolves with the PNG bytes it gets back, rejecting on every failure — unconfigured, unreachable, a non-2xx response, or a body that fails the same magic-byte PNG check the upload path already uses.
The one hard rule: every request names model=u2net explicitly and this is never configurable. The sidecar's default model, reached simply by omitting the parameter, is bria-rmbg, which is licensed non-commercial — a licensing problem that a shop cannot silently ship, and one that would produce a perfectly good image with nothing in it to reveal the mistake. The test that posts against a real stub HTTP server and asserts model=u2net appears on the wire is the only thing guarding against that regressing.
Wires REMBG_URL into both docker-compose.qa.yml and docker-compose.prod.yml as an optional variable, right after ANTHROPIC_WORKSPACE_ID, following the existing style in each file's environment block and header comment. It is deliberately left out of envValidation.ts's ALWAYS_REQUIRED — requiring it would make an environment with no sidecar refuse to boot, which is exactly the failure mode this feature is designed to avoid.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Adds the two columns the background-removal feature (#281) is built on: item_drafts.remove_background (boolean, not null, default true) records the submitter's per-submission intent, and item_images.original_image_path (nullable text, no default) records where a cut-out photo came from so it can be restored. The default on remove_background is load-bearing — any row written by a path that does not mention the column behaves like the new default, so no backfill is needed. original_image_path stays null until a photo has actually been cut out, which doubles as the answer to "can this be restored?" rather than needing a separate flag. Also updates the Drizzle mirror in src/db-drizzle/schema.ts by hand (the local dev database was not running to re-pull from) and adds the integration test backgroundRemoval.integration.test.ts, including the exported seedSubmission helper that Task 3 will reuse.
Closes#281
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Eight tasks over the approved design, each ending in something independently testable: the two columns, the sidecar client, the shared swap-and-restore, the worker step, the intake route, the admin endpoints, the submitter's checkbox, and the review queue's per-photo control.
Three things the plan pins down that the spec left to implementation.
The `model=u2net` assertion lives in a unit test against a real stub HTTP server rather than a mocked fetch, because what has to be checked is the shape of the request that reaches the wire. Nothing in the returned image would reveal that the non-commercial default had been used, so that assertion is the only thing standing between this and a licensing problem that produces perfectly good pictures.
Removal in the worker follows drafting rather than running on its own pass, which couples the two: an environment with no ANTHROPIC_API_KEY drafts nothing and so cuts out nothing. That is the deliberate trade — a separate pass would re-attempt an unreachable sidecar on every five-minute sweep for a row that is going to sit at `queued` indefinitely — and the plan says so in the worker's own header comment rather than leaving it to be rediscovered.
`removeImageBackground` is idempotent through the `original_image_path IS NOT NULL` check rather than a separate flag, and that guard is load-bearing twice: it makes a repeat call a no-op, and it stops a second pass recording the cut-out as the original and losing the real one for good.
Writing it turned up two things worth knowing about the existing tests. `drafting.integration.test.ts` has never produced a successful draft — every case in it either has no key or no readable photo — so the worker's new cases need their own file with `draftListing` mocked, rather than a mock added file-wide to a suite that deliberately never reaches the model. And `adminItemDrafts.integration.test.ts` calls `request(app)` directly with no helper, so the plan spells out the seed it needs instead of pointing at one that does not exist.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
