87f07baaff87ea724239df01a3f9f00400f2e64b
75
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  bermudalambandClaude Opus 5
|
b8549e9c72 |
feat: let a customer resend their own verification email (#110)
A verification email was sent once, at registration. If it was lost, filtered, or arrived after the 24-hour token had expired, the customer had no route back except registering again with a different address. POST /api/customers/resend-verification mints a fresh token and sends the mail, and the account page grows a "Send it again" button beside the warning that was already there. The button only exists while the address is unverified: on a verified account it would be a control whose only outcome is a refusal, and the endpoint refuses that case rather than sending a pointless email. The mint-token-and-send sequence now lives in one place. Registration and the email change already did the same three steps - supersede any outstanding token, mint a new one, send it - and this would have been a third copy. The step most likely to be dropped in a copy is the supersede, and it is the one that matters: without it an older message still sitting in the inbox goes on verifying. Anything that makes the server send mail on request is an abuse vector, so this is rate limited to three an hour, keyed on the customer id. That is tighter than either existing limiter and sidesteps #84's IPv6 problem entirely, since a signed-in caller has an identity better than an address to count against and cannot escape the bucket by moving within a delegated prefix. The refusal says the mail probably did send and to check the spam folder, which is both more useful and more honest than a bare 429. The claim that keying on customer id also solved test isolation was wrong, and the tests caught it. resetDb truncates with RESTART IDENTITY, so every integration test's first customer is id 1: three tests that each sent once left the fourth starting at its limit, and two tests failed on a 429 they never asked for. A "fresh customer per test" is a fresh row with a recycled identity. The limiter now has an explicit exported store the suite clears between tests, and the comment that claimed otherwise has been corrected rather than left to mislead the next reader. Verification: seven integration tests covering the unauthenticated refusal, the send, the new token invalidating the old one - asserted through the endpoint that would honour the stale link rather than by counting rows - the new link actually verifying, the already-verified refusal, the allowance stopping the fourth send rather than merely reporting it, and one customer's exhausted allowance leaving another's intact. Three end-to-end tests for the button, its confirmation and the message on the fourth click. The 33 integration tests across the three suites this touched all pass, as do the 199 backend unit tests. tsc clean on both sides, ESLint no errors. Closes #110 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
32b3f616d9 |
feat: filter by Sold / Not sold / All on the storefront and the admin (#105)
Three decisions were taken before any code, and are recorded on the issue. The status filter is generalised to accept several values rather than gaining a second `sold` dimension beside it. "Not sold" is not a status: it is available-or-reserved on the storefront and includes pending in the admin, neither of which is one value. `?status=available,reserved` and `i.status = ANY($n::text[])` express that with one concept, so there is no way to write a contradiction like `?status=sold&sold=no`. A single status still parses to a list of one, which is how the admin's existing `?status=sold` keeps working untouched. The storefront now defaults to Not sold. That is a change in what every customer sees, not just a new control: the black SOLD ribbons leave the default view on a catalogue where they were evidence the shop sells things, and every storefront link shared so far quietly changes meaning. Accepted deliberately, with the default named in STOREFRONT_DEFAULT_STATUSES rather than implied by the absence of a parameter. The admin's four-way status dropdown is replaced rather than joined. That gives up isolating a single status: there is no longer a way to view only Reserved, or only Pending, and Not sold folds pending in with the rest. The pending workflow from #90 is the likeliest thing to miss it, and if it does, the fix is to put isolation back beside the preset rather than to remove the preset. The e2e test that covered "which is how Reserved is reached" is renamed and narrowed to what survives, rather than deleted. One thing the issue did not anticipate, found by a test rather than by reading. The favorites view deliberately showed sold favorites - "a favorite that has just sold is often exactly what the customer came to look at", and they have just been emailed to say so. Defaulting the storefront to Not sold reversed that silently and broke the test asserting it. Favorites therefore keep their own default of everything, on the server and in the control's displayed position, while an explicit ?status= still wins. That interaction is the kind a single-feature change quietly breaks, and it was caught only because the previous decision had been written down as an assertion. "All" still means different things in the two places, as the issue set out: available + reserved + sold on the storefront, all four in the admin. Pending remains unreachable from every public read - the storefront's unconditional exclusion clause is untouched - and the pending guard now checks every requested status rather than a single one, so `?status=available,pending` is refused for naming pending at all rather than accepted because the first name happened to be allowed. The control sits in the filter bar rather than in the drawer, since the default now hides sold pieces and a customer who never opens the drawer would otherwise have no way to know they exist. It is consequently excluded from the "Filters (N)" count, which describes the drawer, while still counting toward hasActiveFilters so that an empty result reads as "no items match these filters" with a way out rather than as an empty shop. Verification: 13 integration tests covering the default, each preset, the favorites exception and its override, and pending's unreachability under every accepted combination; 38 parser unit tests including multi-value parsing, an unknown name in a list being refused rather than dropped, and a list that names nothing; 6 new end-to-end tests for the storefront control, its URL round-trip, and the default staying out of the URL. 204 backend unit tests and 76 integration tests across the four affected suites pass. Two full end-to-end runs: 110 and 111 passing against the same 3 pre-existing failures, one run also showing a pending-publish failure that passes in isolation and did not recur - the cross-suite database contention filed as #116. tsc, ESLint and the production build are clean. Closes #105 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
1fa723bd19 |
feat: tabs and a rendered preview for the email templates (#119)
Follow-up to #92, which shipped the editable templates as a column of stacked cards. With six templates the cart reminder sat below five editors, so reaching it meant scrolling past all of them and which one you were editing was knowable only from a card title you had already scrolled past. They are tabs now, and the Default/Customised tag moves onto the tab label, so which templates have been changed is visible without opening each one. The larger gap was that there was no way to see what the email would look like. The editor is a markdown textarea; what gets sent is rendered HTML with placeholders substituted and, for the two favorite templates, a consent footer appended by the server. An admin editing copy could not tell whether the result read correctly. POST /api/admin/email-templates/:key/preview renders the draft in the editor rather than what is stored, so the effect of an edit is visible before committing to it. It renders on the server deliberately: renderTemplate is the only thing in the system that turns this markdown into HTML, and markdown-it is configured there with html: false, which is the control that stops an admin putting script into a customer's inbox. A renderer in the browser would be a second implementation of both, and a preview that disagreed with the mailer would be worse than none. It does not enforce required placeholders - saving refuses a body that dropped one, and previewing it is how the admin sees what they have done. The preview renders into a sandboxed iframe rather than through dangerouslySetInnerHTML. The markup is safe by construction, but an email is its own styling context: rendered inline, the admin theme's CSS would change how it looks and the preview would lie about the result. Sample values live beside the template definitions rather than in the route, so adding a placeholder puts the missing sample next to the change that needs it. A unit test asserts every available placeholder has one, because a missing sample renders a literal {{placeholder}} into the preview and teaches the admin their copy is broken when it is not. This also fixes a test that has been failing on main. email-templates.spec.ts located the Save button by filtering .ant-card for the template name, which matched an outer card containing every template's Save button - six of them - and died on a strict mode violation, taking two more tests with it as unrun. Only the active tab's editor is mounted now, so the labels are unambiguous and the filter is gone. Verification: eight end-to-end tests, four for editing and four for the preview, covering the draft being previewed rather than the stored copy, sample values replacing placeholders, raw HTML being escaped exactly as the mailer escapes it, and the consent footer appearing on a favorite template and not on a password reset. The full suite goes from 100 passed / 3 failed / 2 unrun to 112 passed / 2 failed / 0 unrun; the two that remain are the pre-existing password-reset failures that need a database on port 55432 and fail identically on main. 38 backend unit tests pass, tsc and ESLint are clean. Closes #119 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalamb
|
9bb3cc86b6 |
feat(frontend): give order history a page of its own (#121)
The account modal had accumulated: a profile line, a name form, two collapsed panels for changing email and password, two consent switches, an order table and four controls. The table was the piece that fitted worst, being the only tabular data in a 700px dialog whose body is capped at 70vh. The scroll={{ x: 'max-content' }} already on it was a workaround for being in the wrong container rather than a layout choice.
It moves to /orders, an ordinary page in the same Routes block as /cart and /privacy, rather than another entry in MODAL_ROUTES. Order history is a list you read, like the cart, not a dialog you dismiss. A modal at /account/orders would have been the smaller change and was rejected: it inherits the same width and the same scroll cap, so it moves the table without giving it anything.
The page shell follows Cart.tsx, which is the established shape here: a Layout with a Header carrying Back to Shop and the title, and the same guard sending a signed-out visitor to /login. The account modal keeps a View order history button where the table used to be, because that is where a customer looks for it.
One thing changes rather than moves. The old effect caught a failed load with a toast and left orders as an empty array. The toast faded and the empty table did not, so from then on a customer whose request failed saw exactly what a customer with no orders saw, and the page asserted something false. Loading, failed and empty are now three distinct states, and the failed one carries a Retry: a transient failure would otherwise strand someone on a page that needs a full reload to recover.
OrdersBody sits at module level rather than nested inside Orders(). A function declared inside a component counts toward that component's cognitive complexity, which is what made Customers() hard to bring back under the threshold in #81.
The two assertions in account-modal.spec.ts that looked for the text "Order History" inside the modal are updated to look for the link, not deleted. They were the only coverage that the account view still offers any route to the orders, which is exactly what this change could have silently broken.
Verification, against a real backend and database: five new tests covering the signed-out redirect, the empty state, Back to Shop, the link from My Account, and that the page renders as a page rather than a modal over the storefront - that last one is what would catch /orders being added to MODAL_ROUTES and quietly undoing the change. The full suite goes from 100 to 105 passing with no new failures; the three that fail did so before this branch and fail identically on main. tsc and the production build are clean, ESLint reports no errors.
Closes #121
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
bermudalamb
|
84db0e7ca2 |
feat(frontend): let a customer change their own name, password and email (#111)
The three endpoints have been on main since PR #113 with nothing calling them. This adds the UI, which is what the issue is actually about: its title is that PUT /api/customers/me has no caller. The name form sits open on the account view. Changing an email address or a password does not, because both are rare and deliberate, and leaving them expanded would push order history and the account controls below the fold for everyone who never uses them. They go in a collapse instead. Both of those carry a consequence the form cannot show. A new address has to be verified before it can be used to sign in or reset a password, and the old address is told that the change happened. A password change ends every other session. Each is stated above its fields rather than reported afterwards, so the surprise arrives while there is still a chance to back out. The email form asks for the current password. A live session is not enough to move the address a password reset would be sent to, which is the whole reason the server asks for it too. Server refusals are shown as they arrive rather than replaced with something generic: the message names which of the two passwords was wrong, or which name was left blank, and that is the only useful thing to say. The forms live in their own component rather than in Account.tsx. Three forms inline would have roughly doubled that component, and nested JSX bodies count toward the parent's cognitive complexity - the same thing that made Customers() hard to bring back under the threshold in #81. Verification, all against a real backend and database rather than mocks: six new end-to-end tests covering the name surviving a reload, a blank name being refused, the old password ceasing to work while the new one starts working, a wrong current password being refused for both the password and the email change, and an email change marking the account unverified again. The password test asserts the old credential no longer opens the account rather than that the form said something reassuring. The 21 existing account and auth tests still pass, and tsc and ESLint are clean. Closes #111 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
6baa769520 |
feat(frontend): edit the customer emails from Admin → Settings (#92)
SonarQube Analysis / sonarqube (pull_request) Failing after 13m7s
A card per email under the existing settings screen: subject, body, the placeholders it understands, and which of them it cannot lose. Each card starts from the copy that is actually in use — the stored version if there is one, the built-in default otherwise — rather than an empty box, so editing means changing words rather than writing the email from scratch. A badge distinguishes customised from default, which is why the API reports an unedited template as null rather than as its default text: the two are different states and the screen has to be able to tell them apart. Restore default is offered only when there is something to restore, so it is never a button that looks like it did something and did not. It removes the stored rows rather than writing the defaults into them, which is what keeps the badge honest afterwards. The server's refusal is shown verbatim. When a body drops a placeholder it needs, the message names which one, and that message is the entire value of the validation — replacing it with a generic failure would leave an admin guessing at which of five templates and which of three placeholders they broke. A textarea rather than the markdown editor already used for item descriptions. That editor is a heavy dependency to load into the settings screen for five short bodies, and its preview would render markdown as the browser shows it rather than as the email renderer will — a preview that quietly disagrees with the output is worse than none. Worth revisiting if the copy gets longer. Two things the end-to-end spec found rather than assumed. The refusal assertion first matched three elements, because the placeholder appears as the required marker, as an available tag, and inside the error — it now asserts the whole sentence. And the four tests raced each other: the suite runs fully parallel and they all edit one shared stored template, so one asserted a template was unset while another had just saved it. That describe block now runs serially, which is the honest fix for tests that mutate shared server state rather than making the assertions vaguer. Verified: 99 end-to-end tests passing on a freshly created container, up from 95, with the whole suite run rather than the new spec alone — precisely because these tests write state other suites read. Build clean, lint unchanged at 27 warnings. Refs #92 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
b287c07747 |
feat: capture first and last name so emails can greet informally (#106)
Registration collected one optional Name, so every greeting had only a whole name to use: "Hi Thom Lamb," rather than "Hi Thom,". Both parts are now captured, and the cart reminder greets by first name. Both are required of anyone new, refused individually rather than as a single "name is required" so a form that filled one and not the other is told which. The columns are nullable even so, and that is deliberate. Marking them NOT NULL would mean backfilling legacy rows with empty strings, which asserts that every customer has a name — untrue of anyone who registered while the field was optional. The table records what is actually the case; the rule that new registrations must supply both lives in the route, where a missing field can produce a message naming it. The backfill splits on the first space, and it is lossy in a way no version of this avoids. "Thom Lamb" becomes Thom and Lamb; "Mary Jane Smith" gets a last name of "Jane Smith"; names that are not two parts fare worse. It was chosen over leaving the columns empty because nothing currently lets a customer correct their own name — PUT /api/customers/me exists but no frontend calls it — so empty would have meant permanently unpersonalised for every existing customer. The migration says so, so nobody later reads backfilled values as data the customer supplied in that shape. Verified against a seeded database rather than reasoned about, because this is the part that cannot be covered by the suite: migrations run in globalSetup before any test, and the old column is gone afterwards. Six representative rows through the real migration gave Thom/Lamb, Mary/"Jane Smith", Cher/null, " Padded Name " trimmed to Padded/Name, and null and whitespace-only names left as null on both. The down migration rejoins the parts and returns all six to their original strings. The old column is dropped rather than kept alongside, so there is one source of truth instead of two that drift. The admin keeps receiving a single composed display name. It only ever shows one — the list cell and the drawer title — and never edits one, so giving it both parts plus the joining logic would be work for no reader. Churn was the bulk of this: 14 backend registrations and 10 end-to-end registration forms. A first attempt at the backend fixtures also added names to login and password-reset payloads, which would still have passed since the server ignores unknown fields, but a login test implying login takes a name is a small lie; that was reverted and redone against register calls only. Verified: 172 unit, 183 integration and 95 end-to-end passing, lint unchanged at 4 backend and 27 frontend warnings. Not covered: the cart reminder itself, which runs from a cron and had no test before this either. The greeting change is a one-line substitution in that query. Refs #106 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
ecc2219fa5 |
feat: stage new items as pending until an admin publishes them (#90)
An item used to be live on the storefront the instant it was created. Now it starts pending, and a customer sees it only once it is published. The migration changes the column default and nothing else. Backfilling would un-publish the entire live catalogue, which is the one thing it must not do. Hiding a pending item took four separate changes, not one, and that is the part worth knowing. The storefront's item routes had no status filter at all — sold items are listed and rendered with a Sold badge deliberately — so pending could not be expressed as one more optional filter. GET /api/items now carries an exclusion the caller cannot opt out of; GET /api/items/:id carries the same, because hiding an item from the list while still serving it by id would leave it reachable to anyone who kept a link; and GET /api/filters excludes pending from both aggregates it computes. That last one is the least obvious: a pending item would have inflated its tags' counts, so a customer would read "Rare (1)", filter by it, and be told nothing matches — and its price would have stretched the slider to a range no visible item occupies. The tag count is computed over the joined items rather than filtered with a WHERE. A WHERE would have dropped the row for a tag whose only item is pending, and the tag would have vanished from the drawer instead of showing zero. There is a test for exactly that, because the first version of this query had that bug. parseItemFilters is shared by the storefront and admin routes, so 'pending' parses on both. The public route refuses it explicitly rather than answering with an empty list, which would read as "no items match" instead of "you may not ask that". The storefront's URL reader is deliberately left not accepting it either, with a comment saying so, since a request guaranteed to fail is not worth constructing. Publishing is the existing mark-available: same transition, same UPDATE, so the admin UI labels that button "Publish" when the item is pending rather than adding a second endpoint that does the same thing. Unpublish is new and is not symmetrical — it is refused for a reserved item, which someone is holding in their cart right now, and for a sold one, which is a record of something that happened rather than a draft. Both refusals name their reason, and the buttons are hidden in those states so the refusal is not how you find out. Changing a column default has reach, and it surfaced eight test fixtures that silently depended on it. Each is now explicit about the status it wants rather than inheriting one — better practice regardless, and immune to the next default change. Two tests also used 'pending' as their example of an *unknown* status; both would have quietly become tautologies, so they now use one that is genuinely unknown. Verified: 98 unit, 160 integration and 94 end-to-end passing, the last on a freshly created container. One earlier run showed a single failure in favorites.spec.ts; it passes in isolation and on a clean container, and is the cross-spec interference already recorded against the suite rather than anything from this change. Refs #90 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
03f08074d1 |
feat(frontend): preview an inventory item as a customer sees it (#89)
Clicking an item's name in the admin Inventory opens a drawer rendering the real storefront ItemCard for it, so the way a listing will look can be checked without publishing it and going to see. The name cell is a link-styled button rather than a clickable cell, so it stays reachable by keyboard and announces itself as an action. Admin already imports Item from ../api, the same type the storefront uses, so the row object goes straight into the card with no adapter and nothing to drift. The part that needed care is that ItemCard is not a passive component. It wires into the cart and favorites contexts and has working buttons, and both providers wrap the whole app — so a naive preview would have been fully functional, and an admin browsing inventory could have added their own stock to their own cart. On a one-of-a-kind catalogue that reserves the item and takes it off sale. ItemCard therefore takes an optional preview prop that short-circuits its two click handlers. Those two are the only entry points, so guarding them also covers the shared auth modal and the favorite-alerts consent prompt hanging off them. Deliberately not `disabled` on the buttons. A disabled antd button renders in a different colour with a different cursor and no hover, and the whole point of this panel is to show what a customer will actually see. The controls keep their normal appearance and their correct state for the item's status; only the handlers stop. The comment on the prop says so, because "simplifying" this to a disabled button would quietly defeat the feature while appearing to implement it. Four end-to-end tests, two of which are the ones worth having. Clicking Add to Cart in the preview must do nothing — asserted by the sign-in prompt never appearing, which a real click on a signed-out card always raises, so its absence proves the handler stopped before doing any work. And the storefront card must still be live where it is actually used, or this change would have quietly broken buying things. ItemCard's props are now Readonly, which was an existing lint warning on a file this change already touches: frontend warnings drop from 31 to 30. Verified: build clean, lint 0 errors, 91 end-to-end tests passing against a freshly created database. Refs #89 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
f156cecd87 |
feat(frontend): mount error boundaries at the root, the item grid and the modals (#62)
Three mount points, so a render error costs the smallest part of the page it can. The catalogue boundary is the one that earns its keep. The likeliest throw in this app is a component rendering data from the API, and the item grid renders the most of it per page — contained there, the header, cart badge, filters and footer all survive, so a customer can still navigate instead of being handed one dead page. The modal boundary exists because the modal-route arrangement couples two independent trees. /account, /login and the rest render as modals over the storefront as a backdrop, so without a boundary between them a throw in Account blanks the storefront behind it and a throw in the storefront takes the open modal with it. One boundary separates them in both directions. Every escape action is a hard navigation rather than a Link. This is worth stating because the obvious implementation is wrong: a boundary does not reset when the route changes, so a Link would change the URL and go on rendering the fallback, which reads as the app being permanently broken. ErrorFallback changed too, outside this change's original scope and for a reason worth recording. antd's Result renders its title as a plain div with no heading semantics, so a page whose entire content is an error message offered a screen-reader user navigating by headings nothing at all to find. The title is now wrapped in Typography.Title. The tests assert a heading role and were right to; the component was what needed fixing, not the assertion. DevThrow throws on ?boom=<scope> and is mounted only behind import.meta.env.DEV, so Rollup drops it from a production build. Checked in both directions rather than trusted: the dev server serves it, and a production bundle greps to zero occurrences of its marker. A gate that is silently always-off looks identical to one that works. Verified: 87 end-to-end tests pass, 4 of them new — each boundary catches rather than blanking, the header survives a catalogue throw, the storefront survives a modal throw, and the report is observed reaching /api/client-errors on the wire rather than assumed. Build clean, lint 0 errors and 31 warnings. Refs #62 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalamb
|
332c1e7cd0 |
feat(ci): import test coverage into SonarQube (#61)
SonarQube reported 0% coverage for 78 unit, 134 integration and 83 end-to-end tests, so the coverage-on-new-code gate — the most useful thing SonarQube offers a project this size — has been failing permanently while looking configured. It now reports 69.6%, verified by a real scan. Backend coverage comes from both suites, written to separate directories because jest writes coverage/lcov.info by default and the second run would silently overwrite the first. Both are needed rather than just the fast one: the unit suite alone reports 11%, because everything in src/routes is exercised by the integration suite. That suite is manual-only after hanging for 3h12m post-run, so it runs here with --forceExit and the job carries a hard timeout; jest confirmed during testing that it would otherwise have hung. The frontend had no unit tests at all, so its coverage comes from Playwright driving an istanbul-instrumented dev server, collected per test by an auto-fixture and merged with nyc. The 17 specs now import from a local fixtures module that re-exports @playwright/test, which is what lets the fixture attach without touching each test body. Instrumentation is gated behind COVERAGE=true and loaded by dynamic import, since vite-plugin-istanbul is ESM-only while vite.config.ts evaluates as CommonJS. Both directions were checked rather than assumed: a normal build contains no instrumentation, and the dev server instruments nested modules as well as top-level ones — the first attempt used an include glob of src/* which would have silently missed everything under src/admin and src/cart. coverage:report fails when nothing was collected instead of writing an empty report, and that guard was fired deliberately to confirm it works. This project has been bitten twice by tools succeeding while measuring nothing — SonarQube skipping the whole frontend and still exiting EXECUTION SUCCESS in #67, and an ESLint matcher silently matching no files during #60 — and coverage has exactly that shape: an uninstrumented dev server lets every test pass while gathering nothing, and the 0% that follows reads as lost coverage rather than broken collection. Worth knowing when reading the numbers: end-to-end coverage flatters. Istanbul marks a line covered when the browser ran it, so a component rendered during a test counts as covered with nothing asserting anything about it. Recorded in the design doc and the project context rather than left to be discovered. Also declares sonar.tests so test files are analysed under the test rule set rather than as production code. Closes #61 |
||
|
bermudalamb
|
5ebb366074 |
feat(auth): open sign-in and registration as modals over the page behind (#50)
/login, /register and /forgot-password rendered bare cards with no site header. They linked to each other and nowhere else, so a customer who clicked Log in from the storefront and changed their mind had no way back except the browser's back button. All four auth routes are now modals over the page the customer was already on, reusing the backdrop-location arrangement from #51: a direct visit or a link from an email opens over the storefront, so closing always lands somewhere real. They remain real routes, because /reset-password links to /login and customers may have bookmarks. Signing in or registering now returns the customer to the page behind, signed in, rather than moving them to /account. Someone who signs in while browsing wants to carry on browsing, and this is already how the cart and favorites prompts behave when they resume an interrupted action. The larger half of this is removing the duplication. Signing in existed twice — as these routes and again inside the prompt shown when a signed-out visitor adds to the cart or favorites something — and the two had already drifted. There were three different wordings of the marketing consent in circulation: the register page's, a shorter one in the prompt, and the string the server actually stores. The server keeps that text verbatim so the consent record says what the customer saw, which none of the three did. Both callers now render one shared AuthForm whose checkbox is the exact string the server records, and a test asserts that wording so it cannot drift again silently. Steps within the auth flow replace rather than push, so switching between tabs or stepping to password recovery leaves the whole detour as a single history entry and closing returns to where it started instead of walking back through every tab that was looked at. The privacy policy link opens in a new tab: following it in place would discard a part-filled signup form, and /privacy still has no way back of its own until #52. Test changes follow from the destination change rather than being incidental. Nineteen assertions across seven specs waited for /account after signing in; they now assert the header shows a signed-in customer, which is the condition actually being waited for. Modal submits are scoped to their dialog, because the storefront behind now offers a Log in button of its own and an unscoped locator matched both. Assertions that follow a server round-trip were given a realistic timeout — the 5s default is too tight for a bcrypt hash plus re-rendering the storefront behind the modal. Verified with 83 end-to-end tests, all passing, and type checking clean. No backend changes. Closes #50 |
||
|
bermudalamb
|
91485b6ac1 |
feat(account): open My Account as a modal over the page behind it (#51)
/account had no header and no links of any kind, so once a customer opened it the only way back to the storefront was the browser's back button or editing the URL. It is now a modal rendered over whatever the customer was looking at, while staying a real route. Opening it from the header pushes /account and names the current page as the backdrop, so closing returns there with filters intact, and the browser's Back button does the same thing as the close control. Entering /account directly — a bookmark, the link in a verification email, or the redirect after registering — has no page behind it and falls back to the storefront, so closing always lands somewhere real. Keeping it a route means the URL still works: bookmarkable, shareable, and refreshable with the view still open, which the header link and the four post-authentication redirects already depend on. Deleting an account now clears the session as well. Previously it removed the account server-side and navigated home without touching the auth context, so the header went on offering "My Account" for an account that no longer existed until the next reload. That was always wrong, but the modal makes it visible rather than merely stale, because the storefront is rendered behind and the wrong header is on screen throughout. The modal body is capped and scrolls, and the order history table scrolls within itself, so the view survives a phone without pushing its own title and close control off-screen. Also scopes the account switch locator in the favorites spec to the modal, since the storefront now renders behind the account view and has a theme switch of its own, and gives the post-registration wait a realistic timeout — it waits on a bcrypt round-trip rather than a render, and the 5s default was surfacing as a flake on whichever test lost the race under parallel load. Closes #51 |
||
|
bermudalamb
|
d4e2abe743 |
feat: filter the storefront by favorited items (#35)
Adds favorites as another dimension of the existing storefront filter rather than a separate view, so it lives in the URL, shows up as a removable chip, and combines with category, tags, and price by AND like everything else. A customer can ask for "my favorites under $500 in Furniture" instead of only "my favorites". Sold favorites are included. The storefront shows sold items everywhere else, and a favorite that has just sold is often exactly what the customer came back to look at after being emailed about it in #34. Hiding them would make items disappear from a list the customer curated themselves. Anyone wanting only what they can still buy can combine the toggle with the status filter. Which customer "my favorites" means comes from the session, never from the query string, so a hand-edited URL cannot name someone else's favorites. A signed-out visitor sees the toggle and gets the same inline register/login prompt the heart button and Add to Cart already use; signing in resolves the gate and the filter applies on its own. A bookmarked favorites link whose session has expired says so rather than rendering an empty grid, which would tell the visitor they have no favorites instead of that we do not know who they are. The API answers 401 for the same reason, and the admin inventory refuses the filter outright rather than ignoring it. The shared SQL builder now requires callers to say whose favorites they mean, even when that is nobody, and throws instead of dropping the clause — a future caller that forgets the guard fails loudly rather than quietly returning the whole catalogue. Verified with 59 unit tests, 134 backend integration tests, and 70 end-to-end tests, all passing, with type checking clean on both sides. |
||
|
bermudalambandClaude Opus 5
|
f626f27e75 |
feat: favorite items and notify when a favorite is sold (#34)
Customers can favorite and unfavorite items from the storefront, opt in to being told when a favorite is sold to someone else, and manage that preference from their account page. The opt-in is a consent of its own rather than the existing marketing flag. Being told that a specific item you asked about has gone is a narrower thing than agreeing to marketing, and folding one into the other would leave marketing_consent_text no longer describing what was actually agreed to. It is recorded the same way as the marketing consent — flag, timestamp, and the exact wording shown — and accepting it does not set marketing_consent. The prompt appears only after a customer has actually favorited something, so the reason for asking is concrete rather than an abstract marketing ask, and it says plainly that it is separate from marketing email. Declining keeps the favorite. Notifications fire when an item reaches sold, either through checkout or an admin marking it sold, and never to the buyer — telling someone the item they just bought is unavailable reads as a bug. Reserved is deliberately not a trigger: reservations expire and get released, so a "gone" email would often be about an item still for sale. Disabled accounts are excluded, per #33. completeCheckout now returns the sold item ids and the buyer so its three call sites can notify after COMMIT. Sending inside the transaction would email people about a sale that then rolled back, and would hold the transaction open for SMTP. Each message is sent independently so one bad address cannot stop the rest, and the sale has already succeeded regardless. Favoriting while signed out opens the existing inline register/login modal, exactly as Add to Cart does, and completes the favorite on success. Also fixes a latent bug in the same component: while the session was still resolving, `customer` is null for a signed-in visitor too, so clicking Add to Cart or the new heart in that window prompted them to sign in again. Both now ignore clicks until the session has resolved, and the control shows as loading meanwhile. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
13c010ff51 |
feat(admin): disable and re-enable customer accounts (#33)
Adds customers.disabled_at, admin disable/enable endpoints, a Status column and toggle on the Customers tab, and enforcement across every path that authenticates. Enforcement lives in attachCustomer, which previously validated only the session token and its expiry and never read the customer row. Register, login and password reset all mint sessions, so a single check in the middleware covers every path rather than three separate ones — and it means an existing rd_session cookie stops working at once instead of at its 30-day expiry. Disabling also deletes the sessions outright, so eviction does not wait for the next request. Disabling releases the items the customer was holding, in the same transaction. A disabled account cannot check out, so leaving its reservations would keep one-of-a-kind stock off the storefront for up to the cart expiry window for no purpose. Guarded on 'reserved' so a sold item is never resurrected. Re-enabling restores sign-in but does not give the items back — they may since have sold. Sign-in returns an explicit 403 rather than a generic credential failure. That does confirm the address has an account, which sits awkwardly beside the deliberately non-enumerating reset in #32; the trade was made the other way because a disabled customer told "invalid email or password" resets their password, succeeds, is still locked out, and concludes the site is broken. The check runs only after the password verifies, so it is not a bulk membership oracle, and /register already reveals existence. A reset token issued before the disable no longer mints a session, and no new tokens are issued for a disabled account — while still answering 200, so that endpoint stays non-enumerating. Self-service GDPR export and deletion are blocked along with everything else, so those requests now need servicing by hand. Worth checking the privacy policy does not promise unconditional self-service. Also fixes an unrelated bug the e2e run surfaced: the admin inventory fired a request per keystroke in the price fields with no sequencing, so an older response could land after a newer one and repaint stale rows. Only the most recently issued request may now set state. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
db7c61c89d |
feat: customer password reset via email round-trip (#32)
Adds "Forgot password?" to the login page, a request page, and a reset page reached by a one-hour, single-use token delivered by email. Reuses customer_tokens with a new password_reset kind alongside verify_email. The request endpoint always answers 200, whether or not the address has an account, so it cannot be used to test addresses for membership. Note /register still reveals existence through its 409 on a duplicate, so this protection is currently partial; closing that is its own change. Completing a reset deletes every session for that customer. A reset prompted by a compromise has to evict the intruder, and leaving a 30-day cookie alive would defeat the point. It also marks the address verified, since receiving the mail is exactly what verification proves, and supersedes any outstanding token so an older link in the inbox cannot be resurrected. Introduces the first rate limiting in the codebase, on the request endpoint only. The limiter is keyed on caller *and* submitted address: keying on IP alone would let one person lock out everyone behind the same proxy, and everything arrives via Nginx Proxy Manager. Applying that same limiter to the reset endpoint, which carries no address, collapsed every caller into one shared bucket -- so that endpoint is deliberately unlimited instead, protected by a 32-byte single-use token whose bcrypt work only runs after the token matches. The e2e tests read the issued token directly from Postgres rather than through a test-support endpoint. An endpoint returning a reset token for an arbitrary address is account takeover for every customer if it is ever reachable, and an environment gate is thin protection against that. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
f537314259 |
fix(admin): theme, American English, and inventory/reservation tooling (#27)
Seven reported items, of which the first four had two root causes. The active tab was invisible in dark mode because colorPrimary was hardcoded to #1a1a1a in both themes. The accent now inverts with the theme, and colorTextLightSolid inverts with it, or a near-white accent would get antd's default white label and disappear. The Category tab, Tag tab, and item-form category selector ignored the theme entirely. antd declares main: lib/index.js and module: es/index.js, so importing from 'antd' resolves to the ES build while 'antd/lib/...' loads the CommonJS one — two copies, two React contexts, and no ConfigProvider for anything deep-imported. Switching those files to antd/es/* keeps the deep-import convention and shares the instance. This was introduced by my own use of the lib path; es is correct under Vite. Two storefront components had the same latent bug. "Colour" is now "Color". The Customers tab shows how many items each customer is holding, as a link opening the item list with a Release button. Release mirrors the customer's own cart removal — drop the cart row, return the item to available, guarded on 'reserved' so it can never resurrect a sold item — and deliberately sends no email about an action the customer did not take. The count is a subquery rather than another join, which would have multiplied rows and inflated order_count and total_spent_cents. The Inventory tab filters by category, tags, price, and status, reusing the storefront's parser and query builder so the two cannot drift. Reserved is one option in a Status filter rather than a standalone toggle. Also fixes two defects the screenshots exposed: the reserved-count link bubbled to the row handler and opened the customer drawer behind the dialog, and .admin-category-node had no CSS at all, so the tree node name, item count, and actions ran together as one string. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
dd51621956 |
fix: reset the header and return home when a customer logs out (#21)
Logging out destroyed the server session and navigated home, but never told CustomerAuthContext, so `customer` stayed in React state and the header kept offering "My Account" instead of "Log in" and "Sign up". A reload appeared to fix it, because fetchMe then returned null, which is why the symptom looked intermittent. The cart badge had the same cause: CartContext only clears its items once `customer` goes null. Logout now lives on the auth context, which clears `customer` itself rather than triggering a refetch — a refetch would leave a window where the session is gone but the UI still shows the customer signed in. logoutCustomer also ignored res.ok. A failed logout leaves the session cookie valid, so reporting success signed the customer back in on their next reload. It now rejects, and the account page reports the failure and stays put instead of pretending. Logout is not routed through handle() because the endpoint answers 204 with no body. Navigation uses replace, so Back no longer returns to the account page, which would only bounce to /login now the session is gone. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
77e58c0b92 |
fix(admin): confirm writes succeeded and allow inline category creation (#23)
Reported from testing: the item form said "Item added" for a save that never happened. saveItem and the other admin calls returned res.json() without checking res.ok, so a 4xx/5xx resolved normally and every caller reported success for a write the server had rejected. That is worse than failing outright, because nothing prompts the user to look for the missing row. All admin calls now throw on a non-OK response, and the handlers report the error, keep the form open so entered values survive, and only claim success once the server has accepted the write. Mark sold/available previously did nothing visible on failure at all. Categories can now be created from the item form, as tags already could. Previously a category that did not exist yet meant abandoning a half-filled form for the Categories tab. New categories are created at the top level; nesting stays in the Categories tab. The control lives in its own component: inline, every keystroke re-rendered the whole Inventory component and rebuilt the category tree, which visibly jittered the open popup. It sits above the tree rather than below it, where a long list both hid it and made its position depend on the list's measured height. The tree no longer expands everything on open, which does not scale past a screenful; it has search instead. The app now honours prefers-reduced-motion by disabling antd transitions, and the e2e suite runs with that preference set. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
c77fdad2b9 |
fix: run migrations on boot and stop failures rendering as empty (#23)
The storefront showed no inventory after deploying the categories/tags release. No data was lost: the code queried categories/item_tags/ items.category_id against a database where the migration had not been run, and that failure was invisible at every layer. Three changes, each addressing one layer: Migrations now run at container start, so deployed code cannot be ahead of the schema and the easily-forgotten manual `docker exec migrate.js up` step disappears. migrate.js waits for Postgres to accept connections first, since the NAS brings the DB container up slower than the app, and still exits non-zero so a bad migration stops the container rather than serving a half-migrated schema. Express 4 does not forward a rejected async handler, and no error middleware was mounted, so a failing query never responded at all. Async routes are now wrapped and an error middleware guarantees a 500. A hung request is indistinguishable from an empty result in the UI, which is how a schema mismatch came to read as "the store has no items". The storefront now separates "request failed" from "no items" and offers a retry. fetchItems/fetchFilterOptions throw on a non-OK response rather than returning the parsed error body, which would have been set as the item list and crashed the grid on .map. Also restores the project-context update from 7fb5764, which was left out of PR #24 and ended up dangling. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
d28fb5634a |
feat(ui): storefront filters and admin category/tag management (#23)
Storefront gains a Filters drawer holding the category tree, colour-coded tag pills, and a price range, with applied filters shown as removable chips. Filter state lives in the URL query string, so a filtered view is shareable and the back button works. Item cards now show their category and tags. Admin gains Categories and Tags tabs, and the item form gains a category TreeSelect plus a tags Select that creates new tags on the fly. The admin category tree tracks expansion in state rather than using defaultExpandAll: that prop is evaluated once at mount, so a branch added afterwards rendered collapsed and its children were unreachable. Creating or moving a node now expands its parent. Caught by the new admin e2e spec. The chip row is marked as a named group so its "Clear all" stays distinguishable from the drawer's. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
a240d86762 |
test: disambiguate the Email locator in auth.spec
getByLabel('Email') matched two elements on /register -- the email input and
the marketing consent checkbox, whose label "Send me occasional emails"
contains the substring. Playwright's strict mode failed both tests that
filled it.
getByRole('textbox', ...) narrows by role, so the checkbox no longer collides.
Applied to the /login usage too, so the same concept reads the same way
throughout the file.
These failures were latent: the frontend-e2e job died at the build step
before it ever reached the tests, so CI never reported them.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
|
||
|
bermudalambandClaude Opus 5
|
b7c8c37447 |
fix: add the missing /verify-email page
Verification emails linked to /verify-email?token=..., but no such route existed in main.tsx and nothing in the frontend ever called POST /api/customers/verify-email. The SPA catch-all served index.html, no route matched, and the page rendered blank -- so the token was never redeemed and accounts stayed unverified forever. The gap was invisible until SMTP was configured, because no verification email had ever actually been delivered. Adds VerifyEmail.tsx (verifying / verified / failed states), a verifyEmail call in customerApi, and the route. The request is pinned to a single firing via a ref: the endpoint deletes the token on success, so StrictMode's double effect invocation in dev would otherwise overwrite the success state with "invalid or expired token". Verified end to end against a local stack: a real token flips customers.email_verified to true and is consumed from customer_tokens. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalamb
|
921022c658 |
Add backend unit/integration tests, Playwright e2e tests, README, cookie Secure fix
SonarQube Analysis / sonarqube (push) Successful in 4m20s
|