2f6e855596a601a6f257bfa2fa4cc57e5ace558b
27
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  bermudalambandClaude Opus 5
|
71cbd142c3 |
fix: address the final review of the error boundaries (#62)
Five findings from a whole-branch review, two of which mattered. The catalogue boundary could not be recovered by the very controls it exists to keep alive. When the item grid threw, the header, filter chips and Clear filters stayed mounted — that was the point — but clicking Clear filters only changed the URL. A boundary does not reset on a client-side state change, so the fallback went on rendering over a catalogue that would by then have loaded perfectly well, and the only offered action reloaded the same failing URL. The shop read as permanently broken, which is the failure this whole change exists to prevent, reintroduced one level down. ErrorBoundary now takes an optional resetKey and clears itself when it changes; the catalogue boundary passes the filter key. The page and modal boundaries deliberately do not take one, because their escapes are hard navigations that remount the tree already — recorded on the prop so nobody completes the pattern by symmetry. The client-error endpoint could fill the disk. It is unauthenticated, each accepted report wrote about 8.7 KB, and Docker's default json-file driver has no size cap — so the rate limiter bounded a render loop, as its comment claims, but not a few hundred cheap source addresses. Stack and component stack now truncate at 1000 rather than 4000, which is still around fifteen frames and cuts the worst case to under 3 KB, and the QA compose file caps and rotates the log. Production is a Portainer stack outside this repository and needs the same option applied there; noted in the design doc rather than left implied. Three smaller things. A falsy thrown value defeated the boundary entirely: throw null is legal, and branching on the error object alone treated it as no error, re-rendered the children, threw again, and would have taken the root down — a blank page, the one outcome this is all here to avoid. The boundary now tracks hasError separately and synthesises a real Error for non-Error throws. The modal fallback announced its title twice to a screen reader, once as the dialog's name and once as the heading inside it, so the redundant dialog title is gone. And the design doc claimed the development-only detail shows the component stack when it only ever showed the message; corrected, with a note that the stack still reaches the server log, which is where it is useful. Verified after all five: backend lint 0 errors, 144 integration tests, frontend lint 0 errors and 31 warnings, 87 end-to-end tests, all against a freshly created database. Refs #62 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
f156cecd87 |
feat(frontend): mount error boundaries at the root, the item grid and the modals (#62)
Three mount points, so a render error costs the smallest part of the page it can. The catalogue boundary is the one that earns its keep. The likeliest throw in this app is a component rendering data from the API, and the item grid renders the most of it per page — contained there, the header, cart badge, filters and footer all survive, so a customer can still navigate instead of being handed one dead page. The modal boundary exists because the modal-route arrangement couples two independent trees. /account, /login and the rest render as modals over the storefront as a backdrop, so without a boundary between them a throw in Account blanks the storefront behind it and a throw in the storefront takes the open modal with it. One boundary separates them in both directions. Every escape action is a hard navigation rather than a Link. This is worth stating because the obvious implementation is wrong: a boundary does not reset when the route changes, so a Link would change the URL and go on rendering the fallback, which reads as the app being permanently broken. ErrorFallback changed too, outside this change's original scope and for a reason worth recording. antd's Result renders its title as a plain div with no heading semantics, so a page whose entire content is an error message offered a screen-reader user navigating by headings nothing at all to find. The title is now wrapped in Typography.Title. The tests assert a heading role and were right to; the component was what needed fixing, not the assertion. DevThrow throws on ?boom=<scope> and is mounted only behind import.meta.env.DEV, so Rollup drops it from a production build. Checked in both directions rather than trusted: the dev server serves it, and a production bundle greps to zero occurrences of its marker. A gate that is silently always-off looks identical to one that works. Verified: 87 end-to-end tests pass, 4 of them new — each boundary catches rather than blanking, the header survives a catalogue throw, the storefront survives a modal throw, and the report is observed reaching /api/client-errors on the wire rather than assumed. Build clean, lint 0 errors and 31 warnings. Refs #62 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
3e9d9a57c0 |
fix(frontend): make the error reporter genuinely unable to throw (#62)
The comment claimed the reporter could not throw and the code did not deliver it. JSON.stringify(report) and the call to fetch both run synchronously, as arguments, before the promise carrying the .catch exists — so a throw from either escaped straight out of componentDidCatch, where nothing remains to catch it. The boundary that exists to stop errors would itself have been the thing that crashed. Not merely theoretical: React does not guarantee the value handed to componentDidCatch is a real Error despite the parameter's type, because code can throw anything. An object whose message or stack is circular makes JSON.stringify throw. The body is now wrapped in try/catch for the synchronous part, and the existing .catch still covers rejection once the request is in flight. Neither covers the other, so both are kept, and the comment now says so rather than asserting a guarantee the code did not make. Verified: build clean, lint 0 errors and 31 warnings, unchanged. Refs #62 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
e0ae2dcbcd |
feat(frontend): add an error boundary, its fallback, and error reporting (#62)
Three pieces, none of them mounted yet — the next change wires them into the tree. ErrorBoundary is the only class component in the codebase, because getDerivedStateFromError and componentDidCatch have no hook equivalent. It knows nothing about antd and nothing about how reporting reaches the server: the fallback arrives as a render prop, which is what lets one boundary serve a full page, an inline region and a modal without knowing which it is. ErrorFallback is the single place that decides whether a customer is shown a stack trace. The detail is gated on import.meta.env.DEV so a developer sees the throw immediately while a production bundle cannot render it at all — one decision in one file rather than the same judgement repeated at three mount points, where they would drift apart. reportClientError posts to the endpoint added earlier and deliberately swallows its outcome. That is the one place in this feature where swallowing is correct: it runs inside componentDidCatch, so a reporter that rejected would throw from the very thing that exists to stop throws, with nothing left to catch it. vite-env.d.ts was not in the plan and is needed. Nothing in this app had used import.meta.env before, so there was no ambient declaration for it and tsc rejected the DEV check outright. The standard one-line Vite reference fixes it, adds no dependency, and would have been needed by the next change regardless. Verified: build clean, lint 0 errors and 31 warnings, unchanged from the branch baseline. No unit tests, because the frontend has no unit suite — that gap belongs to #72, and these components are covered end to end by the next change. Refs #62 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalamb
|
4bad40868c |
refactor(frontend): actually reduce Customers' complexity rather than relocate it (#81)
The previous commit claimed this one fixed. It was not: hoisting the confirm dialog to module level moved the reported line from 12 to 60, and I read that as the finding having moved to the hoisted function. It had not — line 60 was Customers() itself, still scoring exactly 16. The scan is what caught it, which is the argument for scanning rather than reasoning about what a rule will say. Two further attempts also failed to move the number, and both are worth recording because they were wrong about what cognitive complexity counts. Collapsing five branches on `disabling` into one copy object fixed the hoisted function but left Customers() at 16. Extracting ten ternaries out of the table's cell renderers into module-level components left it at 16 as well — the ternaries inside a render callback were never the weight. What actually carried the score was the drawer and the reserved-items dialog: two JSX bodies whose loading, empty and populated states are each a branch nested several levels inside the component. Extracting them as CustomerDetailPanel and ReservedItemsBody takes Customers() under the limit. The cell-renderer extraction is kept even though it did not move the metric. NameAndEmail, BooleanTag, ReservedCell and ToggleDisabledButton read better than the inline callbacks did, and BooleanTag removes a repetition the Status column was open-coding differently from Verified and Subscribed. Verified on a scan rather than by argument: technical debt 85 minutes to 5, code smells 14 to 1, and the one that remains is the S6478 false positive. ESLint holds at 31 warnings against a baseline of 35. End-to-end 83 pass. One thing found on the way: the e2e suite is not idempotent against a persistent database. Two runs against a database that had already served three produced two different pairs of failures; recreating it produced a clean 83. CI is unaffected because its Postgres is fresh per run, but locally the suite needs a new database rather than a repeated one. Refs #81 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
5f9172512c |
refactor: clear the 85 minutes of technical debt (#81)
Thirteen of SonarQube's fourteen code smells, with the fourteenth argued as a false positive rather than coded around. Four of these were not stylistic. The Remove button in Cart's List.Item actions array carried no key, so React could not match it across renders and rebuilt it on every cart render. The cart, customer-auth and favorites providers each passed a freshly allocated object as their context value, which re-renders every consumer whenever the provider renders, cart or session unchanged — and these three wrap the entire storefront, so the fan-out was the whole tree. Two of them also rebuilt a Set on every render for good measure. All four now memoized on the values they actually derive from. The four cognitive-complexity findings wanted real restructuring rather than suppression. parseItemFilters splits into one helper per field, leaving the function with the order those helpers run in and the single rule that spans two fields; the order is preserved exactly, because a query wrong in two ways reports the first field and rearranging the calls would change which error a caller sees. adminCategories' PUT extracts the parent resolution — the existence check and the cycle check — into a resolver that returns the refusal rather than sending it. App's four-way render chain becomes a Catalogue component, which also removes two of the nested ternaries. Customers' confirm dialog moves to module level, since a function's cognitive complexity counts everything declared inside it and that dialog branches on `disabling` five times. The rest were mechanical: two more nested ternaries — a status-colour lookup and a pluralisation helper — and one type assertion that asserted the type the expression already had. Left alone: S6478 on CategoryTreeSelect's popupRender. That is antd's render prop, called as a function and spliced in, never mounted as a component type, so the destroy-the-subtree failure the rule describes cannot happen. Marked false positive in SonarQube with that reasoning rather than contorting the component around a rule that misread it. Verified rather than assumed. Backend unit 78 pass, integration 134 pass, end-to-end 83 pass, both workspaces build clean. ESLint warnings drop from 35 to 31 with no new file warning — the same React and SonarJS rules #60 turned on are what surfaced this backlog in the first place. Refs #81 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
bermudalamb
|
7b89023d5e |
feat(frontend): show the RD mark beside the storefront wordmark
Puts the monogram to the left of "Redefined Designs" in the site header. Inline SVG rather than an <img src="/favicon.svg"> for two reasons. The tile is drawn in currentColor so it follows the antd text token and inverts with the app's own theme switch — the favicon file inverts on prefers-color-scheme, which tracks the operating system and would disagree with the app whenever someone toggles the theme themselves. And the letters are knocked out with a mask rather than painted in the background colour, so the mark sits correctly on any surface instead of carrying a backdrop that only matches this header. The mask id is generated per instance, since two marks on one page would otherwise share an id and the second would reference the first. It is stripped to alphanumerics because React's generated ids contain colons. Marked aria-hidden: the wordmark beside it already says the name, so announcing it again would be noise. Verified by screenshotting the header in both themes rather than by reasoning about the colours. |
||
|
bermudalamb
|
c058b3ed2e |
feat(ci): add ESLint to both workspaces with a defect-only CI gate (#60)
TypeScript's strict mode checks types and nothing else, so nothing enforced the React hook rules, the SonarJS rules, or unhandled-promise detection. Adds a flat config per workspace, a lint script in each, and a lint job in tests.yml. The rule selection is the substance of this change and is measured rather than guessed. A full-strength config reports 435 violations across 50 files, but 325 of those are the no-unsafe-* family from recommendedTypeChecked, every one downstream of pool.query() returning any rows and untyped fetch responses. Typing those boundaries is the whole of #65, so enabling the rules here would ship a linter whose output is three-quarters another issue's backlog — the reliable way to teach everyone to ignore lint output. This enables recommended plus the two type-aware rules that catch defects rather than describe type debt, which leaves 110 findings. Both configs downgrade every preset to a warning and then list the error rules explicitly at the bottom, so the CI gate is readable in one place instead of inferred from four presets' defaults. Errors are no-floating-promises, no-misused-promises, rules-of-hooks, exhaustive-deps and jsx-a11y/alt-text; everything else warns. No --max-warnings flag is needed because ESLint already exits non-zero on errors and zero on warnings. no-misused-promises runs with checksVoidReturn.attributes false, since onClick={async () => ...} is idiomatic React and safe when the handler catches its own errors — at the default it flags every antd button in the admin screens, 25 of its 28 hits, and a rule that is 89% noise gets switched off within a week. The 37 errors this surfaced were mostly not the mechanical fix they looked like. The plan assumed the 30 floating promises were fire-and-forget loaders that already handled their own failures, which was true of the one sampled when writing the design and false for most of the rest: Admin, Categories, Customers, Tags, Settings, Account and CustomerAuthContext all had no rejection handling at all, so `void` on them would have hidden real failures rather than annotated deliberate ones. Each of those loaders now catches and surfaces the failure before the call site voids it. The CustomerAuthContext one was a live bug — a rejected fetchMe left loading true forever, rendering as a permanent spinner instead of a signed-out page. Admin's load became a useCallback so its effect can name it honestly rather than suppress the dependency, Categories' drop handler was split so the function antd receives returns void as its type says, and Cart's effect now names refreshCartContext, which is a useCallback with an empty dependency list and so cannot re-run it. The only disable added is in asyncRoute, where returning a promise where Express expects void is the entire point of the wrapper and the promise cannot reject. Two of the issue's premises did not survive measurement, both recorded in the spec: exhaustive-deps flags 2 cases rather than the 10 inferred from empty dependency arrays, and the backend was already clean on the defect rules because #59 wrapped every async route. Verified: lint, build, 78 unit, 134 integration and 83 e2e all pass in both workspaces, and the CI gate was confirmed to fail by introducing a deliberate violation rather than by assuming the job is wired correctly. Closes #60 |
||
|
bermudalamb
|
5ebb366074 |
feat(auth): open sign-in and registration as modals over the page behind (#50)
/login, /register and /forgot-password rendered bare cards with no site header. They linked to each other and nowhere else, so a customer who clicked Log in from the storefront and changed their mind had no way back except the browser's back button. All four auth routes are now modals over the page the customer was already on, reusing the backdrop-location arrangement from #51: a direct visit or a link from an email opens over the storefront, so closing always lands somewhere real. They remain real routes, because /reset-password links to /login and customers may have bookmarks. Signing in or registering now returns the customer to the page behind, signed in, rather than moving them to /account. Someone who signs in while browsing wants to carry on browsing, and this is already how the cart and favorites prompts behave when they resume an interrupted action. The larger half of this is removing the duplication. Signing in existed twice — as these routes and again inside the prompt shown when a signed-out visitor adds to the cart or favorites something — and the two had already drifted. There were three different wordings of the marketing consent in circulation: the register page's, a shorter one in the prompt, and the string the server actually stores. The server keeps that text verbatim so the consent record says what the customer saw, which none of the three did. Both callers now render one shared AuthForm whose checkbox is the exact string the server records, and a test asserts that wording so it cannot drift again silently. Steps within the auth flow replace rather than push, so switching between tabs or stepping to password recovery leaves the whole detour as a single history entry and closing returns to where it started instead of walking back through every tab that was looked at. The privacy policy link opens in a new tab: following it in place would discard a part-filled signup form, and /privacy still has no way back of its own until #52. Test changes follow from the destination change rather than being incidental. Nineteen assertions across seven specs waited for /account after signing in; they now assert the header shows a signed-in customer, which is the condition actually being waited for. Modal submits are scoped to their dialog, because the storefront behind now offers a Log in button of its own and an unscoped locator matched both. Assertions that follow a server round-trip were given a realistic timeout — the 5s default is too tight for a bcrypt hash plus re-rendering the storefront behind the modal. Verified with 83 end-to-end tests, all passing, and type checking clean. No backend changes. Closes #50 |
||
|
bermudalamb
|
91485b6ac1 |
feat(account): open My Account as a modal over the page behind it (#51)
/account had no header and no links of any kind, so once a customer opened it the only way back to the storefront was the browser's back button or editing the URL. It is now a modal rendered over whatever the customer was looking at, while staying a real route. Opening it from the header pushes /account and names the current page as the backdrop, so closing returns there with filters intact, and the browser's Back button does the same thing as the close control. Entering /account directly — a bookmark, the link in a verification email, or the redirect after registering — has no page behind it and falls back to the storefront, so closing always lands somewhere real. Keeping it a route means the URL still works: bookmarkable, shareable, and refreshable with the view still open, which the header link and the four post-authentication redirects already depend on. Deleting an account now clears the session as well. Previously it removed the account server-side and navigated home without touching the auth context, so the header went on offering "My Account" for an account that no longer existed until the next reload. That was always wrong, but the modal makes it visible rather than merely stale, because the storefront is rendered behind and the wrong header is on screen throughout. The modal body is capped and scrolls, and the order history table scrolls within itself, so the view survives a phone without pushing its own title and close control off-screen. Also scopes the account switch locator in the favorites spec to the modal, since the storefront now renders behind the account view and has a theme switch of its own, and gives the post-registration wait a realistic timeout — it waits on a bcrypt round-trip rather than a render, and the 5s default was surfacing as a flake on whichever test lost the race under parallel load. Closes #51 |
||
|
bermudalamb
|
d4e2abe743 |
feat: filter the storefront by favorited items (#35)
Adds favorites as another dimension of the existing storefront filter rather than a separate view, so it lives in the URL, shows up as a removable chip, and combines with category, tags, and price by AND like everything else. A customer can ask for "my favorites under $500 in Furniture" instead of only "my favorites". Sold favorites are included. The storefront shows sold items everywhere else, and a favorite that has just sold is often exactly what the customer came back to look at after being emailed about it in #34. Hiding them would make items disappear from a list the customer curated themselves. Anyone wanting only what they can still buy can combine the toggle with the status filter. Which customer "my favorites" means comes from the session, never from the query string, so a hand-edited URL cannot name someone else's favorites. A signed-out visitor sees the toggle and gets the same inline register/login prompt the heart button and Add to Cart already use; signing in resolves the gate and the filter applies on its own. A bookmarked favorites link whose session has expired says so rather than rendering an empty grid, which would tell the visitor they have no favorites instead of that we do not know who they are. The API answers 401 for the same reason, and the admin inventory refuses the filter outright rather than ignoring it. The shared SQL builder now requires callers to say whose favorites they mean, even when that is nobody, and throws instead of dropping the clause — a future caller that forgets the guard fails loudly rather than quietly returning the whole catalogue. Verified with 59 unit tests, 134 backend integration tests, and 70 end-to-end tests, all passing, with type checking clean on both sides. |
||
|
bermudalambandClaude Opus 5
|
f626f27e75 |
feat: favorite items and notify when a favorite is sold (#34)
Customers can favorite and unfavorite items from the storefront, opt in to being told when a favorite is sold to someone else, and manage that preference from their account page. The opt-in is a consent of its own rather than the existing marketing flag. Being told that a specific item you asked about has gone is a narrower thing than agreeing to marketing, and folding one into the other would leave marketing_consent_text no longer describing what was actually agreed to. It is recorded the same way as the marketing consent — flag, timestamp, and the exact wording shown — and accepting it does not set marketing_consent. The prompt appears only after a customer has actually favorited something, so the reason for asking is concrete rather than an abstract marketing ask, and it says plainly that it is separate from marketing email. Declining keeps the favorite. Notifications fire when an item reaches sold, either through checkout or an admin marking it sold, and never to the buyer — telling someone the item they just bought is unavailable reads as a bug. Reserved is deliberately not a trigger: reservations expire and get released, so a "gone" email would often be about an item still for sale. Disabled accounts are excluded, per #33. completeCheckout now returns the sold item ids and the buyer so its three call sites can notify after COMMIT. Sending inside the transaction would email people about a sale that then rolled back, and would hold the transaction open for SMTP. Each message is sent independently so one bad address cannot stop the rest, and the sale has already succeeded regardless. Favoriting while signed out opens the existing inline register/login modal, exactly as Add to Cart does, and completes the favorite on success. Also fixes a latent bug in the same component: while the session was still resolving, `customer` is null for a signed-in visitor too, so clicking Add to Cart or the new heart in that window prompted them to sign in again. Both now ignore clicks until the session has resolved, and the control shows as loading meanwhile. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
13c010ff51 |
feat(admin): disable and re-enable customer accounts (#33)
Adds customers.disabled_at, admin disable/enable endpoints, a Status column and toggle on the Customers tab, and enforcement across every path that authenticates. Enforcement lives in attachCustomer, which previously validated only the session token and its expiry and never read the customer row. Register, login and password reset all mint sessions, so a single check in the middleware covers every path rather than three separate ones — and it means an existing rd_session cookie stops working at once instead of at its 30-day expiry. Disabling also deletes the sessions outright, so eviction does not wait for the next request. Disabling releases the items the customer was holding, in the same transaction. A disabled account cannot check out, so leaving its reservations would keep one-of-a-kind stock off the storefront for up to the cart expiry window for no purpose. Guarded on 'reserved' so a sold item is never resurrected. Re-enabling restores sign-in but does not give the items back — they may since have sold. Sign-in returns an explicit 403 rather than a generic credential failure. That does confirm the address has an account, which sits awkwardly beside the deliberately non-enumerating reset in #32; the trade was made the other way because a disabled customer told "invalid email or password" resets their password, succeeds, is still locked out, and concludes the site is broken. The check runs only after the password verifies, so it is not a bulk membership oracle, and /register already reveals existence. A reset token issued before the disable no longer mints a session, and no new tokens are issued for a disabled account — while still answering 200, so that endpoint stays non-enumerating. Self-service GDPR export and deletion are blocked along with everything else, so those requests now need servicing by hand. Worth checking the privacy policy does not promise unconditional self-service. Also fixes an unrelated bug the e2e run surfaced: the admin inventory fired a request per keystroke in the price fields with no sequencing, so an older response could land after a newer one and repaint stale rows. Only the most recently issued request may now set state. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
db7c61c89d |
feat: customer password reset via email round-trip (#32)
Adds "Forgot password?" to the login page, a request page, and a reset page reached by a one-hour, single-use token delivered by email. Reuses customer_tokens with a new password_reset kind alongside verify_email. The request endpoint always answers 200, whether or not the address has an account, so it cannot be used to test addresses for membership. Note /register still reveals existence through its 409 on a duplicate, so this protection is currently partial; closing that is its own change. Completing a reset deletes every session for that customer. A reset prompted by a compromise has to evict the intruder, and leaving a 30-day cookie alive would defeat the point. It also marks the address verified, since receiving the mail is exactly what verification proves, and supersedes any outstanding token so an older link in the inbox cannot be resurrected. Introduces the first rate limiting in the codebase, on the request endpoint only. The limiter is keyed on caller *and* submitted address: keying on IP alone would let one person lock out everyone behind the same proxy, and everything arrives via Nginx Proxy Manager. Applying that same limiter to the reset endpoint, which carries no address, collapsed every caller into one shared bucket -- so that endpoint is deliberately unlimited instead, protected by a 32-byte single-use token whose bcrypt work only runs after the token matches. The e2e tests read the issued token directly from Postgres rather than through a test-support endpoint. An endpoint returning a reset token for an arbitrary address is account takeover for every customer if it is ever reachable, and an environment gate is thin protection against that. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
f537314259 |
fix(admin): theme, American English, and inventory/reservation tooling (#27)
Seven reported items, of which the first four had two root causes. The active tab was invisible in dark mode because colorPrimary was hardcoded to #1a1a1a in both themes. The accent now inverts with the theme, and colorTextLightSolid inverts with it, or a near-white accent would get antd's default white label and disappear. The Category tab, Tag tab, and item-form category selector ignored the theme entirely. antd declares main: lib/index.js and module: es/index.js, so importing from 'antd' resolves to the ES build while 'antd/lib/...' loads the CommonJS one — two copies, two React contexts, and no ConfigProvider for anything deep-imported. Switching those files to antd/es/* keeps the deep-import convention and shares the instance. This was introduced by my own use of the lib path; es is correct under Vite. Two storefront components had the same latent bug. "Colour" is now "Color". The Customers tab shows how many items each customer is holding, as a link opening the item list with a Release button. Release mirrors the customer's own cart removal — drop the cart row, return the item to available, guarded on 'reserved' so it can never resurrect a sold item — and deliberately sends no email about an action the customer did not take. The count is a subquery rather than another join, which would have multiplied rows and inflated order_count and total_spent_cents. The Inventory tab filters by category, tags, price, and status, reusing the storefront's parser and query builder so the two cannot drift. Reserved is one option in a Status filter rather than a standalone toggle. Also fixes two defects the screenshots exposed: the reserved-count link bubbled to the row handler and opened the customer drawer behind the dialog, and .admin-category-node had no CSS at all, so the tree node name, item count, and actions ran together as one string. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
dd51621956 |
fix: reset the header and return home when a customer logs out (#21)
Logging out destroyed the server session and navigated home, but never told CustomerAuthContext, so `customer` stayed in React state and the header kept offering "My Account" instead of "Log in" and "Sign up". A reload appeared to fix it, because fetchMe then returned null, which is why the symptom looked intermittent. The cart badge had the same cause: CartContext only clears its items once `customer` goes null. Logout now lives on the auth context, which clears `customer` itself rather than triggering a refetch — a refetch would leave a window where the session is gone but the UI still shows the customer signed in. logoutCustomer also ignored res.ok. A failed logout leaves the session cookie valid, so reporting success signed the customer back in on their next reload. It now rejects, and the account page reports the failure and stays put instead of pretending. Logout is not routed through handle() because the endpoint answers 204 with no body. Navigation uses replace, so Back no longer returns to the account page, which would only bounce to /login now the session is gone. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
77e58c0b92 |
fix(admin): confirm writes succeeded and allow inline category creation (#23)
Reported from testing: the item form said "Item added" for a save that never happened. saveItem and the other admin calls returned res.json() without checking res.ok, so a 4xx/5xx resolved normally and every caller reported success for a write the server had rejected. That is worse than failing outright, because nothing prompts the user to look for the missing row. All admin calls now throw on a non-OK response, and the handlers report the error, keep the form open so entered values survive, and only claim success once the server has accepted the write. Mark sold/available previously did nothing visible on failure at all. Categories can now be created from the item form, as tags already could. Previously a category that did not exist yet meant abandoning a half-filled form for the Categories tab. New categories are created at the top level; nesting stays in the Categories tab. The control lives in its own component: inline, every keystroke re-rendered the whole Inventory component and rebuilt the category tree, which visibly jittered the open popup. It sits above the tree rather than below it, where a long list both hid it and made its position depend on the list's measured height. The tree no longer expands everything on open, which does not scale past a screenful; it has search instead. The app now honours prefers-reduced-motion by disabling antd transitions, and the e2e suite runs with that preference set. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
c77fdad2b9 |
fix: run migrations on boot and stop failures rendering as empty (#23)
The storefront showed no inventory after deploying the categories/tags release. No data was lost: the code queried categories/item_tags/ items.category_id against a database where the migration had not been run, and that failure was invisible at every layer. Three changes, each addressing one layer: Migrations now run at container start, so deployed code cannot be ahead of the schema and the easily-forgotten manual `docker exec migrate.js up` step disappears. migrate.js waits for Postgres to accept connections first, since the NAS brings the DB container up slower than the app, and still exits non-zero so a bad migration stops the container rather than serving a half-migrated schema. Express 4 does not forward a rejected async handler, and no error middleware was mounted, so a failing query never responded at all. Async routes are now wrapped and an error middleware guarantees a 500. A hung request is indistinguishable from an empty result in the UI, which is how a schema mismatch came to read as "the store has no items". The storefront now separates "request failed" from "no items" and offers a retry. fetchItems/fetchFilterOptions throw on a non-OK response rather than returning the parsed error body, which would have been set as the item list and crashed the grid on .map. Also restores the project-context update from 7fb5764, which was left out of PR #24 and ended up dangling. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
d28fb5634a |
feat(ui): storefront filters and admin category/tag management (#23)
Storefront gains a Filters drawer holding the category tree, colour-coded tag pills, and a price range, with applied filters shown as removable chips. Filter state lives in the URL query string, so a filtered view is shareable and the back button works. Item cards now show their category and tags. Admin gains Categories and Tags tabs, and the item form gains a category TreeSelect plus a tags Select that creates new tags on the fly. The admin category tree tracks expansion in state rather than using defaultExpandAll: that prop is evaluated once at mount, so a branch added afterwards rendered collapsed and its children were unreachable. Creating or moving a node now expands its parent. Caught by the new admin e2e spec. The chip row is marked as a named group so its "Clear all" stays distinguishable from the drawer's. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalambandClaude Opus 5
|
b7c8c37447 |
fix: add the missing /verify-email page
Verification emails linked to /verify-email?token=..., but no such route existed in main.tsx and nothing in the frontend ever called POST /api/customers/verify-email. The SPA catch-all served index.html, no route matched, and the page rendered blank -- so the token was never redeemed and accounts stayed unverified forever. The gap was invisible until SMTP was configured, because no verification email had ever actually been delivered. Adds VerifyEmail.tsx (verifying / verified / failed states), a verifyEmail call in customerApi, and the route. The request is pinned to a single firing via a ref: the endpoint deletes the token on success, so StrictMode's double effect invocation in dev would otherwise overwrite the success state with "invalid or expired token". Verified end to end against a local stack: a real token flips customers.email_verified to true and is consumed from customer_tokens. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
bermudalamb
|
1421694a0c | fix: add back-to-shop navigation on cart page | ||
|
bermudalamb
|
86f48ed3f8 | fix: add back-to-shop navigation on cart page | ||
|
bermudalamb
|
b85cdb9c44 | fix: cart badge not updating after account creation due to stale closure | ||
|
bermudalamb
|
9ab689e624 | feat: add customer cart with expiry, shipping addresses with USPS validation, and multi-item PayPal checkout | ||
|
bermudalamb
|
9325610517 | fix: markdown editor not accepting input due to Form.Item prop injection conflict | ||
|
bermudalamb
|
f5218782e9 |
Fix header overflow on mobile viewports
SonarQube Analysis / sonarqube (push) Successful in 6m55s
|
||
|
bermudalamb
|
9be4986dd3 | Initial commit: redefined-designs storefront |